Luminous 5 Led Barrier

View all images Product description The 5 lights barrier is composed by a folded bar in black colour, by 5 led lights, by a piloting central board, by a remote control connected via cable and by a 5 meters power supply cable.

The low side barrier is composed by n. 2 reversed “U” barrier connected with the using of screws, inside the barriers there are the connection cables betwen the lights and for the power supply.

Each single light is composed by a front side luminous led amber optic and a back side orange case in moplen for the application on the barrier.

The piloting circuit managed by micro controller is placed in a proper box connected to the last right light of the sequence. The remote control is equipped with 6 positioning lights of the commutator for the selection of the required configuration; it is connected to the piloting central board through a 5 mts cable.

The barrier configuration permits a large possibility of applications for reinforcing the signals or for the installation in any vehicle that works in emergency situations and/or in presence of road works.
Electrical specifications

Power supply: 12V - 24V c.c. (Automatic survey of the tension)
Working mode: switch on in sequence of 2 or more than 2 lights
Average and maximum absorption
- with 12V: 2,05A - with 24V: 4,10A (synchronous flashing)
- with 12V: 0,68A - with 24V: 0,82A (sequence flashing)
- with 12V: 2,05A - with 24V: 2,46A (alternate flashing)
- with 12V: 0,82A - with 24V: 1,64A (external lights flashing)
Photo-cell control for the regulation of the luminous intensity
Luminous sources:led diodes with high intensity in amber colour
Luminous optics diameter 223 mm, usable 200 mm
Electronic central board: manage by micro controller

Full description of Luminous 5 Led Barrier

Code Luminous Barrier with 5 LED optics 200mm with case - with central board
201900174

Dimensions Largeness - 140 cm
Height - 28 cm
Width - 23 cm

Weight 7,5 kg

References - 89/336/CEE and CE mark

- EN 61000-4-2, EN 61000-4-4, EN 55022

- Luminous optics under UNI EN 12352 with luminous

- Intensity in the category L8H

External surface treatment - Battery box in galvanized metal
- lights parts in shockproof plastic material, weatherproof and UV rays resistant.
Working descriptionThe 5 lights barrier is particularly suitable to signal to the vehicles lane changes, a road deviation, or an obstruction. The barrier draws the attention of the drivers in the presence of works on the road and in emergency.

The sequential systems permit to the road users to have a safe direction indication in dangerous situations.
Mechanical characteristics Low barrier in pre-painted alluminium folded at reverse “U” connected with the use of screws.

Led optics:
- front side shell in transparent “lexan” material;
- back side orange colour case in moplen
Working scheme
Luminous 5 Led Barrier - working scheme

Luminous 5 Led BarrierHome > Products > Traffic Led Light > Sequential Led Systems > Luminous 5 Led Barrier