The Sequential System is composed by Led lights. The system works with a synchronization system via cable without any central box.
The transmission of the synchronization signal goes on directly from one light to the following one.
The led lamps are composed by a back side orange colour moplen case and a lexan shockproof lens.
The System is composed by one Master light at the beginning of the sequence and a variable number of Slaves lights.
The Master light has 2 connectors. One male connector for the connection of the power supply cable, and one female connector for the connection with the Slaves lights.
From the master light it is possible to choice three different speed of the flashing, switch on the 24h working option or the nightlight option, and it's possible to switch on a nightlight guide light.
The Master light is able to check the battery charge level, when it arrived at a tension under 12 Volts, a red light starts lighting on the back side case of the light.
The Master is programmed to automatically manage the brightness intensity of all the lights. In this way all the lights will have always the same light intensity level.
The Slave is provided with one cable and one connector. The cable permits the connection with the master light and the trasmission of the incoming synchronization signal. The female connector permits the connection with the following slave light and the trasmission of the synchronization signal.
On request the sequential system could be supplied only with the slaves lights. In this case the sequential system has less functions (it is not possible to select the speed, switch on the nightlight option and the guide light). The sequential system without the master permits to the user more flexibility in its usage: for example if the user has an 8 slave lights sequential system it is possible to divide it in two 4 lights systems (in the case of a system made only by slave lights it needs an additional adapter cable for the connection with the power supply cable).
NOTICE: the slave lights of this sequential system are compatible with the lights of the the previous model of the sequential system.
In the case of a only slave lights sequential system each slave is able to automatically regulate its own intensity light according to the level of the daylight brightness.
In the bottom part the lights are equipped with a cup for the application of the system over rubber cones, PVC panels, on delineators and other kinds of supports as poles etc.
The power supply is supplied by a 12volts battery (a 100Ah battery is recommended) and/or a feeder 230/V approx./12V c.c. both housed in a metallic box with removable cover.
The Sequential System can be made by a maximum of 10 lights. On specific request it is possible to supply sequential systems with an higher number of lights, in this case please contact the us. The connection cables between the lights have a length of 12 meters. On request it is possible to have longer cables. For the systems with a total cables length that exceed the measure of 130 meters, it is recommended to install the power supply in the middle of the system, in this case please contact the us to request the T - shaped cable for the connection.
Working descriptionThe sequential system is used to signal to the incoming vehicle a lane change and/or a diversion. The system installed on specific supports by a flashing sequence makes a guide light that permit to the incoming vehicle to be adviced of the beginning of the obstacle on the lane and the direction to follow.
The sequential systems permit to the road users to have a safe direction indication in dangerous situations.
External surface treatment - Battery box in galvanized metal
- lights parts in shockproof plastic material, weatherproof and UV rays resistant.
Full description of Export Sequential System
Slave Light - 201900188
Power supply cabel for master light 200500119
Adapter cabel for slave light
200500120
W/R class I cm 25x100 signal panel
204200005
Safety base plate 28kg - 201800033
Cap for 60 cm pole - 909037186
- Norms EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 55022
- European Standard EN 12352
- Power supply: with lead battery of 12 Volt
Working mode: switch on in sequence of 2 or more than 2 lights
Synchronization system: via cable transmission of the signals from the previous to the next flashing light
Cables length: 12 mts (between the flashing lights), 5 mts (power supply cable)
Number of lights that can be synchronized: maximum 10*
Flashing per minute: 33, 60 and 95 depending on the selected speed
Duty cycle luminous emission: 8%, 10% 11% according to the selected speed
Luminous source: light composed by 120 LED with high intensity (in compliance with EN 12352 - L8H Class)
Pick absorbsion: 1,7 Ampère
Control board of the lights: at the solid condition with CMOS components. Manages by the master light (if there is), otherwise manages by each single light
Photo-cell control: automatically regulates the luminous intensity emitted by the lamp according to the environmental light.
- * For systems with more than 10 lights and with total length of the cables more than 130 meters it is necessary to contact the manufacturer.
Working scheme
