Led optics Ø 300 mmHome > Products > Traffic Led Light > Led Optics > Led optics Ø 300 mm

5 /images/category/traffic-led-light/led-optics/300mm-led-optic/

View all images
About led opticsThe optic is made of 2 shells (front shell - the lens, back shell - the base) fixed together, shells are made of transparent lexan shockproof and weatherproof material. The position of the optics is showed by the 2 back side arrows.
Electrical specifications

• Power supply - 12V - 24V c.c.
• Functioning
  - standard flashing
  - on request (flash, triflash and/or steady light)
• Photo-cell control to regulate the luminous intensity (on request: functioning only during the night)
• Daily consumption (single light optic Ø 300mm)
  - standard flashing - 14,094 A a 12V, 5,742 A at 24V
  - flash - 1,409 A at 12V, 0,574 A at 24V
  - triflash - 4,228 A at 12V, 1,723 A at 24V
  - steady light - 1,585 A at 12V
• Daily consumption (double advance light Ø 300mm)
  - standard flashing - 28,188 A at 12V, 11,484 A at 24V
  - flash - 2,818 A at 12V, 1,148 A at 24V
  - triflash - 8,456 A at 12V, 3,446 A at 24V
• Flashing frequency - 1 Hz (60 flashes per minute)
• Luminous source - 232 amber col. high intensity led
• Luminous optics diameter - 340 mm, usable 290 mm
• Micro-controller piloting circuit

Working sheme
Full description of Led optics Ø 300mm

Code Double advance warning light synchro Ø 300mm - 201900124

Double advance warning light synchro alternate Ø 300mm - 201900127

Flashing light optic single Ø 300mm
201900121

Steady light optic single Ø 300mm
201900145

Advance warning light single Ø 340mm with cap Ø 42mm - case in moplen - 201900130

Advance warning light synchro Ø 340mm with cap Ø 42mm - case in moplen - 201900133

Advance warning light alternate Ø 340mm with cap Ø 42mm - case in moplen - 201900136  

References - European Regulation 89/336/CEE with CE marking

- European Standard EN 12352  

Led optics specifications- intensity - 21cd
- angle - 15°C
- wavelength - 150nm
- temperature range - -40°C/+70°C
About Led advance warning lightThe advance warning light is made of a rear orange case in moplen, and from 2 shells (front shell - lens, back shell - base) the 2 shells are made of transparent lexan shockproof and weather-proof material. To grant a perfect seal the 2 shells are fixed together with screws and also with use of appropriate tuns, shell closing fixed the internal electronic board with led. Equipped with 5mts power cable.
About Cap Ø 42mmCap Ø 42mm, on request the cap for the pole Ø 48mm and Ø 60mm can be supplied.